logoweb backtoproduct

 

STICKY MAT

CT-ESM2436 ESD-ANTISTATIC STICKY MAT

Antistatic, resistivity: 10e9~11 ohm/sq. per ASTM D257
Material: MDPE film coated with eco-water based acrylic glue
Size: 24" X 36"

Color: blue or white (green, grey
- subject to stock available)
Packing: 30 layer/mat, 10 mats/carton
Adhesion: Low - 150g/25mm ; Standard - 200g/25mm ; High - 250g/25mm
Effectively taking dust & particle away from shoes
Best for CleanRoom of industries, food, pharmaceutical, hospital

TECHNICAL DATA OF CT-ESM2436

Thickness: 0.040X1 + 0.045X30 + 0.055X1 = 1.445mm
Bottom adhesion: 650 +/- 100g
Decay time: within 5 seconds per JIS L 1094: 1997
Tensile strength: > 2.5 kgf/mm2
Dust removal cleaniness: > 99% in five steps per lab. Method

CT-STM2436 STICKY MAT

Remove contamination by peeling off the layer of the mat
Adhesive bottom holds floor securely
Easily to remove and leave no residue
A thin layer of protective on the top of the layer
Numbered tab at the corner of each layer for peeling
Packing: 30 layer
s/mat, 10 mats/carton
Color: navy blue, white, and gre
y
Size: 18"x45"
. 24"x36". 26"x45"
Materials: LDPE, acrylic glue
Tensile of mat surface - 300gr/cm±30 ; Back - 100gr/cm±20 ; Ground - 550gr/cm±50

Adhesion: Low - 150g/25mm ; Standard - 200g/25mm ; High - 250g/25mm
Effectively taking dust & particle away from shoes
Best for CleanRoom of industries, food, pharmaceutical, hospital


CT-ESM2436